Century Series

Century Series Specification
Ceiling Hung System

General
ECOPLUS supply and install Century Restroom Cubicle System, which is highly resistant against water, chemical and impact.
Century cubicles provide elegant appearance with full length of pilasters hanging from ceiling which is widely used in commercial projects.

Materials
All panels shall be of High Pressure Laminates (HPL) compact board (or phenolic board) which are certified by Singapore Environment Council with Singapore Green Label. Colour selection can be done from wide range of solid and wood grain with different texture finishing.
All accessories and hardware shall be made of stainless steel grade 304.

Doors
All doors come in 19mm thick HPL compact board. Each door will be supported by 3 heavy duty stainless steel gravity hinges affixed to the pilaster. Additional hinge will be required if door exceeds weight limit. Door consists of one stainless steel door knob and stainless steel coat hook. All vertical edges are rebated and chamfered.

Pilasters
All pilasters come in 19mm thick HPL compact board. Top of pilaster will be secured by galvanized rectangular hollow section (100mm x 50mm x 4.5mm) enclosed by false ceiling. All pilasters are hanged freely from the top without any bottom support. End pilasters will be affixed to the finishing wall with aluminum extrusion U channel. Pilaster consists of one stainless steel thumb turn lockset. All vertical edges are rebated and chamfered with black rubber act is damper to reduce noise and impact.

Intermediate Partitions
All intermediate partitions come in 12mm thick HPL compact board. Both end of intermediate partition are secured to the finishing wall and center pilaster with aluminum extrusion U channel.

Accessories and Fittings
Galvanized rectangular hollow section (100mm x 50mm x 4.5mm thk). Aluminum extrusion U channel (27mm x 16mm x 1.5mm thk) comes in natural anodized and black anodized finishing.
All accessories such as thumb turn lockset with indicator, coat hook with bumper, door knob, gravity hinges are in stainless steel grade 304 finishing.
Powder coating finishes for aluminum is available upon request with surcharge.

Size
Recommended cubicle overall size shall be 900mmW x 1800mmD x (Ceiling Height) with 150mm floor clearance. Door size: 600mm x 1800mm; Pilaster size: 300mm x (Ceiling Height); Divider size: 1800mm x 1800mm

Full Service

1. Design advisory
2. Product and solution proposal
3. Specification writing
4. Project estimation
5. CAD layout drawings
6. Installation^
7. After sales support^
8. Warranty^
9. Maintenance^