About Us

Horizon Series

Horizon Series

CONTACT US TO UPGRADE YOUR DOORS!

CONTACT US TO UPGRADE YOUR DOORS!

HORIZON Series Specification Floor Mounted System (Floating Effect)
General ECOPLUS supply and install Horizon Restroom Cubicle System, which is highly resistant against water, chemical and impact. Horizon cubicles adopt a 60mm thick ‘Favolic’ – (honeycomb phenolic), provide a floating effect with no headrail support. A winning formula for modern commercial restroom. Materials Door and pilaster panels shall be of High Pressure Laminates (HPL) compact board (or phenolic board) which are certified by Singapore Environment Council with Singapore Green Label. Intermediate partition panels shall be of 60mm thick ‘Favolic’ – (honeycomb phenolic) which are PSB tested and GREENGUARD certified. Colour selection can be done from wide range of solid and wood grain with different texture finishing. All accessories and hardware shall be made of stainless steel grade 304. Doors All doors come in 19mm thick HPL compact board. Each door will be supported by 3 heavy duty stainless steel gravity hinges affixed to the pilaster. Additional hinge will be required if door exceeds weight limit. Door consists of one 304 stainless steel door knob and stainless steel coat hook. All vertical edges are rebated and chamfered. Pilasters All pilasters come in 19mm thick HPL compact board. Pilaster will be secured onto 60mm thick intermediate partition with no visible joint mechanism. All pilasters are hanged freely without any top and bottom support. End pilasters will be affixed to the finishing wall with no visible joint mechanism. Additional bracket supports are necessary if the pilasters length and weight exceed the limit. Pilaster consists of one stainless steel thumb turn lockset. All vertical edges are rebated and chamfered with black rubber act is damper to reduce noise and impact. Intermediate Partitions All intermediate partitions come in 60mm thick ‘Favolic’ panel. Intermediate partitions will be secured to the back of wall with non-visible mechanical fixings. The only support on floor will be 150mm from front of pilasters, size of 300mmW x 150mmH, covered with stainless steel skirting. Accessories and Fittings All accessories such as thumb turn lockset with indicator, coat hook with bumper, door knob, gravity hinges are in stainless steel grade 304 finishing. Size Recommended cubicle overall size shall be 900mmW x 1800mmD x 1950mmH with 150mm floor clearance. Door size: 600mm x 1800mm; Pilaster size: 300mm x 1800mm; Divider size: 1800mm x 1800mm Full Service
  1. Design advisory
  2. Product and solution proposal
  3. Specification writing
  4. Project estimation
  5. CAD layout drawings
  6. Installation^
  7. After sales support^
  8. Warranty^
  9. Maintenance^
CAD Drawing
Horizon Series Download PDF