Infiniti/Serif Series

Infiniti Series Specification
Floor Mounted System

General
ECOPLUS supply and install Infiniti Restroom Cubicle System, which is highly resistant against water, chemical and impact.
Infiniti cubicles offer a level of durability where function and price are the most important factors.

Materials
All panels shall be of High Pressure Laminates (HPL) compact board (or phenolic board) which are certified by Singapore Environment Council with Singapore Green Label. Colour selection can be done from wide range of solid and wood grain with different texture finishing.
All accessories and hardware shall be made of nylon with selection of black, grey, white in colour.

Doors
All doors come in 12mm thick HPL compact board. Each door will be supported by 3 heavy duty nylon gravity hinges affixed to the pilaster. Additional hinge will be required if door exceeds weight limit. Door consists of one nylon door knob and one nylon coat hook.

Pilasters
All pilasters come in 12mm thick HPL compact board. Top of pilaster will be secured by aluminum extrusion head rail usually comes in B.A or N.A finishing. Bottom of pilaster will be secured with heavy duty nylon adjustable leg anchored to the floor. End pilasters will be affixed to the finishing wall with aluminum extrusion U channel. Pilaster consists of one nylon thumbturn lockset and aluminum extrusion door jamb with black rubber act is damper to reduce noise and impact.

Intermediate Partitions
All intermediate partitions come in 12mm thick HPL compact board. Both end of intermediate partition are secured to the finishing wall and centre pilaster with aluminum extrusion U channel.

Accessories and Fittings
Omega aluminum extrusion head rail (75mm x 38mm x 1.5mm thk) comes in natural anodized and black anodized finishing.
Aluminum extrusion U channel (27mm x 16mm x 1.5mm thk) comes in natural anodized and black anodized finishing.
All accessories such as thumb turn lockset with indicator, coat hook, door knob, adjustable leg, gravity hinges are in nylon finishing.
Choice of black, white and grey can be selected.
Powder coating finishes for aluminum is available upon request with surcharge.

Size
Recommended cubicle overall size shall be 900mmW x 1800mmD x 2000mmH with 150mm floor clearance. Door size: 600mm x 1800mm; Pilaster size: 300mm x 1830mm; Divider size: 1800mm x 1800

Full Service

1. Design advisory
2. Product and solution proposal
3. Specification writing
4. Project estimation
5. CAD layout drawings
6. Installation^
7. After sales support^
8. Warranty^
9. Maintenance^